Jump to content

GWR 3800 Class

From Wikipedia, the free encyclopedia

GWR 3800 'County' Class
3818 County of Radnor as built in 1906
Type and origin
Power typeSteam
DesignerGeorge Jackson Churchward
BuilderSwindon Works, Great Western Railway
Order numberLots 149, 165, 184
Serial number2056–2065, 2209–2228, 2415–2425
Build date1904, 1906, 1911–12
Total produced40
Specifications
Configuration:
 • Whyte4-4-0
Gauge4 ft 8+12 in (1,435 mm) standard gauge
Leading dia.3 ft 2 in (965 mm)
Driver dia.6 ft 8+12 in (2,045 mm)
Wheelbase24 ft 0 in (7,315 mm)
Axle load18.15 long tons (18.44 t; 20.33 short tons)
Adhesive weight34.3 long tons (34.85 t; 38.42 short tons)
Loco weight55.3 long tons (56.19 t; 61.94 short tons)
Tender weight36.75 long tons (37.34 t; 41.16 short tons)
Total weight92.05 long tons (93.53 t; 103.10 short tons)
Fuel typeCoal
Water cap.3,000 imp gal (13,638 L; 3,603 US gal)
Firebox:
 • Grate area20.56 sq ft (1.91 m2)
BoilerGWR Standard No. 4
Boiler pressure200 psi (1,379 kPa)
Heating surface:
 • Firebox128.30 sq ft (11.92 m2)
 • Tubes1,689.82 sq ft (156.99 m2)
 • Total surface1,818.12 sq ft (168.91 m2)
Cylinders2, outside
Cylinder size18 in × 30 in (457 mm × 762 mm)
diameter x stroke
Valve gearStephenson
Performance figures
Tractive effort20,530 lbf (91 kN)
Career
OperatorsGreat Western Railway
Class3800
Power classGWR: C
Number in class40
Numbers3473–82, 3801–30 until Dec 1912
3800–39 from December 1912
Official nameCounty
NicknamesChurchward's Rough Riders
Axle load classGWR: Red
Withdrawn1930–33
DispositionAll original locomotives scrapped; one new-build under construction
Dimensions as built[1]

The Great Western Railway 3800 Class, also known as the County Class, were a class of 4-4-0 steam locomotives for express passenger train work introduced in 1904 in a batch of ten. Two more batches followed in 1906 and 1912 with minor differences. They were designed by George Jackson Churchward, who used standard components to produce a four-coupled version of his Saint Class 4-6-0s.

Construction

[edit]

The first locomotive, No. 3473 County of Middlesex, was built at Swindon Works in May 1904, with the following nine completed by October 1904.[2] They were initially fitted with parallel-sided copper-capped chimneys, which were soon replaced by tapered cast iron chimneys.[3] The second batch, of twenty, were built between October and December 1906. This batch had tapered cast iron chimneys from the start.[4] A third and last batch of ten were built between December 1911 and February 1912.[5] On these the footplates had curved drop ends at the cab and front bufferbeam.[6] They were also fitted from new with a superheater and top feed.[5] Chimneys were a larger version of the copper-capped type of the first batch.[3]

Coupled wheels had independent springing, without the compensating beams fitted between the axleboxes on Churchward's 4-6-0s.[7] The cylinder block, including the piston valves and smokebox saddle, was constructed from two castings from the same pattern, bolted back to back, each casting containing one half of the saddle.[2] The cab, boiler and coupled wheels were attached to plate frames. The cylinder block was carried on two bar frames, bolted to the front end of the plate frames.[7] The piston valves were driven by Stephenson valve gear. The class were fitted with the Standard No. 4 boiler.[2] One locomotive, No. 3805 County Kerry was fitted with a smaller Standard No. 2 boiler between November 1907 and May 1909.[4]

Table of orders and numbers[8]
Year Quantity Lot No. Works Nos. Locomotive numbers Notes
1904 10 149 2056–2065 3473–3482 renumbered 3800, 3831–3839 in 1912
1906 20 165 2209–2228 3801–3820
1911–12 10 184 2416–2425 3821–3830

Operation

[edit]

They were the last new GWR 4-4-0 design and by far the most modern, with inside frames and outside cylinders. They were designed as a part of Churchward's standardisation plan, but were found to have a front end too powerful for the wheel arrangement and all were withdrawn by the early 1930s. They were designed, in part, for the Hereford to Shrewsbury LNWR line over which the GWR had running powers, but on which they were expressly forbidden to use 4-6-0 locomotives. The 4-4-0 Counties were in effect a shortened GWR 2900 Class, providing engines powerful enough for the trains but with the requisite four-coupled wheels.

The key components were all proven but the combination was somewhat poor, and perhaps the least successful of Churchward's designs. From the outset they were found to be rough riders but were otherwise effective locos. All other GWR 4-4-0s were inside-cylindered and none had a piston stroke greater than 26 inches, whereas the 'County' had a 30-inch stroke driving a meagre 8 ft 6 ft wheelbase.

The County Class used the same cylinders and motion as Churchward's six-coupled locomotives and required the same mass to counterbalance the reciprocating parts of the motion. However the weight required had to be divided between four driving wheels rather than six. The heavier balance weights produced a high level of wheel hammer blow; at six revolutions per second the hammer blow was 8 tons, compared with the 3.6 tons of the inside-cylindered City Class and the 6.4 tons of the six-coupled Saint Class. The left hand trailing axleboxes often developed hammering, which was caused by the amount of counterbalancing used.[9]

This class were subject to the 1912 renumbering of GWR 4-4-0 locomotives, which saw the Bulldog class gathered together in the series 3300–3455, and other types renumbered out of that series. The County Class took numbers 3800–3839.

3833 County of Dorset was the first to be withdrawn, in February 1930. By the end of 1933 all had gone, the last survivor being No. 3834 County of Somerset, withdrawn in November of that year.[10]

County Tank 2221

They were also the basis for the 'County Tank' GWR 2221 Class design, a 4-4-2T using the same basic design as the County but with a smaller and lighter boiler, and the replacement of the tender by the addition of side tanks, bunker and trailing axle.

Numbers Name
First Second (1912)
3473 3800 County of Middlesex
3801 3801 County Carlow
3802 3802 County Clare
3803 3803 County Cork
3804 3804 County Dublin
3805 3805 County Kerry
3806 3806 County Kildare
3807 3807 County Kilkenny
3808 3808 County Limerick
3809 3809 County Wexford
3810 3810 County Wicklow
3811 3811 County of Bucks
3812 3812 County of Cardigan
3813 3813 County of Carmarthen
3814 3814 County of Chester
3815 3815 County of Hants
3816 3816 County of Leicester
3817 3817 County of Monmouth
3818 3818 County of Radnor
3819 3819 County of Salop
3820 3820 County of Worcester
3821 3821 County of Bedford
3822 3822 County of Brecon
3823 3823 County of Carnarvon
3824 3824 County of Cornwall
3825 3825 County of Denbigh
3826 3826 County of Flint
3827 3827 County of Gloucester
3828 3828 County of Hereford
3829 3829 County of Merioneth
3830 3830 County of Oxford
3474 3831 County of Berks
3475 3832 County of Wilts
3476 3833 County of Dorset
3477 3834 County of Somerset
3478 3835 County of Devon
3479 3836 County of Warwick
3480 3837 County of Stafford
3481 3838 County of Glamorgan
3482 3839 County of Pembroke

New Build – 3840 County of Montgomery

[edit]

No members of the class were preserved. However, the Great Western Society took the decision to create the next locomotive in the sequence, 3840 County of Montgomery.[11] The project has been handed over to the Churchward County Trust and 3840 will be based at the Gloucestershire Warwickshire Railway following its construction at Tyseley Locomotive Works in Birmingham. The locomotive is being built with both new parts, such as the driving wheels which have been cast using the pattern created for Saint Class 2999 Lady of Legend, and recycled standard parts recovered from former Barry scrapyard locomotives including the Standard No. 4 Boiler, the pony truck wheel set, two pony truck axle boxes, four horn guides and two eccentric sheaves from 5205 Class 2-8-0T 5227, and four driving wheel axle boxes from 2800 Class 2-8-0 2861.

Models

[edit]

Hornby Railways manufacture a model of the 38xx in OO gauge. 3mm Scale Model Railways manufacture a model kit of the 38xx in TT gauge. Hornby manufactured between 1931-1936 electric and clockwork tin-plate models of the 3821 County of Bedford in 0 gauge.

See also

[edit]

References

[edit]
  1. ^ le Fleming 1962, pp. J10–J12
  2. ^ a b c Nock 1978, p. 14
  3. ^ a b Haresnape & Swain 1993, p. 56
  4. ^ a b Nock 1978, p. 15
  5. ^ a b Nock 1978, p. 38
  6. ^ Holcroft 1971, p. 102
  7. ^ a b Nock 1978, p. 13
  8. ^ Allcock et al. (1968), pp. 30–31.
  9. ^ Nock 1978, p. 16
  10. ^ Nock 1978, p. 66
  11. ^ "Churchward County Trust". Churchward County Trust. Retrieved 22 August 2018.

Bibliography

[edit]
  • Allcock, N. J.; Davies, F. K.; le Fleming, H. M.; Maskelyne, J. N.; Reed, P. J. T.; Tabor, F. J. (1968) [1951]. White, D. E. (ed.). The Locomotives of the Great Western Railway, part one: Preliminary Survey. Kenilworth: RCTS.
  • le Fleming, H.M. (February 1962). White, D.E. (ed.). The Locomotives of the Great Western Railway, part nine: Standard Two-Cylinder Classes. RCTS.
  • Holcroft, Harold (1971). An Outline Of Great Western Locomotive Practice 1837-1947. Shepperton, Middlesex: Ian Allan. ISBN 0-7110-0228-2.
  • Haresnape, Brian; Swain, Alec (1993) [1976]. Churchward Locomotives: A Pictorial History. Shepperton, Middlesex: Ian Allan. ISBN 0-7110-0697-0.
  • Nock, O.S. (1977). Standard Gauge Great Western 4-4-0s Part 1 Inside Cylinder Classes 1894-1910. Newton Abbot: David & Charles. ISBN 0-7153-7411-7.
  • Nock, O.S. (1978). Standard Gauge Great Western 4-4-0s Part 2 Counties to the Close 1904-1961. Newton Abbot: David & Charles. ISBN 0-7153-7684-5.
[edit]