Jump to content

Talk:Halftone

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

dpi clarification

[edit]

I think the article could be improved by clarifying that DPI refers to the resolution of the rendering of halftone dots and not to PPI or any other type of resolution. For instance I do not think that it is clear that Laser Printer 300DPI refers the fineness of the dots being drawn and not to the digital file being printed. 97.75.161.222 (talk) 19:53, 7 June 2010 (UTC)[reply]

dots get too small?

[edit]

The effect has its limits, when the dots get too small or spaced too far apart, the eye starts seeing dots again.

How so? Obviously, when dots are too far apart, they will look like individual dots, but when they are too small? I'd think the smaller they get (that is, the greater the lines-per-inch of the halftone screen), the more smooth they would appear to the human eye. Can someone clarify this? -- Wapcaplet 01:28, 10 May 2004 (UTC)[reply]

When the halftone frequency is too high for the reproducing medium's resolution (be this the Laser Printer or Image Setter dpi resolution or the repro film's grain size) an effect of posterization occurs. Maybe this is what the comment is getting at. Another possibility is due to the flaw that this article refers to 'Screened halftoning' only and not other forms of halftone such as dithering. Under Floyd-Steinberg or Error-Diffusion dithered halftoning (halftoning processes used in inkjet printers) areas of low intensity (ie where the dots are spaced wide apart) have the dots much clearer to the eye (due to high contrast). This is the reason that reverse grey component replacement is used. It is also the reason for the new generation of 6 or 7 colour inkjet printers (often called photo printers). One day I will explain this clearly in the article itself, but it's a big ask as I'm new to wiki... --Bb3cxv 7 July 2005 14:15 (UTC)

halftone before digital processes

[edit]

I've always been fascinated to learn how this process actually took place before digital. How did a newspaper in the 70s take a photograph and turn it into this dots pattern? Can someone add this in - a brief descrption of the actual process? TeamCoachingNetwork 06:43, 30 November 2006 (UTC)[reply]

It was originally done in about the 1880s by using closely-spaced parallel lines etched onto glass - hence the 'lines-per-inch' measurement and the 'screen ruling' term. 2 sheets of ruled glass were glued face to face at 90 degrees at first. This was called the 'screen.' Dropping an expensive glass screen was a disaster. Aligning the rules diagonally rather than at right angles would give diamond-shaped cells that generated elliptical dots, which were useful for printing certain types of image. By the 1970s when I was doing this at print college, the 'contact screens' were single cross-ruled sheets of thin clear plastic.
The screen was placed in a very large 'process' camera. It was positioned ruled-side down in close contact with a sheet of unexposed film, and the whole sandwich held flat by a vacuum plate. A photograph was then taken of the continuous tone photographic original. A high contrast 'lith' film was used, which gave essentially pure black or pure white images, ie close to binary. As the original greyscale image was projected by the lens, it fell onto the screen where it was split up by the cells into small discrete areas which formed the basis of individual dots.
The dots were round despite the square screens because of diffraction effects around the cell edges, coupled with the high contrast film/paper which ignored the grey tones due to light fall-off around the edges of the cells. The dots were therefore sharp-edged, with different sizes depending on the light intensity of the particular area of the original that they represented.
The haltoned film image was a negative, which was then placed face-down in contact with a photo-sensitive surface on the printing plate (which might be letterpress, lithography, flexography or gravure). Placing the film face-down was vital for maximum image transfer quality, but meant that the image was mirror-image reversed. To allow for this, a reversing mirror set was placed in front of the lens of the process camera, so the initial screened negative image was reversed to start with. This meant that the final plate was correct.
So actually the halftone dots were originally formed by a relatively simple optical effect and the challenge of early electronic systems was to recreate this effect digitally for scanners and laser film recorders. Simoneccles 03:48, 3 January 2007 (UTC)[reply]
Newspapers created "Screen Prints"
Many newspapers could not afford a process camera, a PMT processor, and a huge darkroom which many process cameras required. Therefore, a different halftoning process was created for newspapers. (I believe that this process was created by Kodak since most of the original supplies were available from Kodak and sold exclusively to newspapers. However, by the time I began to use this process, most people bought their screens from a Japanese company.)
Rather than take a postive image and turn it into a negative halftone, the low-budget newspaper process used the same darkroom and the same photograph enlarger to create a positive image which could be placed on a page of typesetting to be photographed by a process camera onto a printing plate (without any additional halftoning.) This positive image was called a "screen print" or "screened halftone print" or erroneously, "paper halftone".
A black and white roll of film (usually Tri-X) was developed normally. Then a negative was placed in the photographic enlarger but rather than printing onto photographic gray tone paper, the image was printed onto a high contrast paper. To create the halftone, a specially designed plastic screen was placed over the high contrast paper from Kodak and other companies. The paper and the contact screen was held in place on a tiny frame by a tiny vacuum pump or for really inexpensive operation, the screen and the high contrast paper were held down by a piece of glass with extra pressure applied by the darkroom operator. The light from the enlarger created a positive image on the high contrast paper. The image was developed with a very high contrast developer to get pure back and white dots. This was called a "Screen Print". As long as the resolution was 85 dpi or less (some low quality newspapers used 65 dpi which is the same as the shading used in newspaper cartoons), a printing plate could be photographed directly from the screen print. Some very high quality newspaper printers could capture higher resolution than 85 dpi but it was better to use a negative halftone for higher quality work. Most instant presses (using paper plates or, better yet, plastic plates) could easily use page layouts which contained screen prints without doing any halftoning of the printing plate as long as the screen print was not more than 85 dpi.
Care had to be taken in creating the screened print because of dot gain of the printing plate running on the printing press. A screen print ranged in dot sizes of roughly 15% to 85%. Any dots smaller than 15% would fade out entirely when photographed onto a printing plate leaving big white splotches in the final image from the newspaper printing press. And dots larger than 85% turned to solid black which not only looked bad but also were hard on the newspaper printing press. The dot gain was different for each newspaper printing press (and for each instant printer printing press). Calibration had to be done for each press. Robert Elliott 16:56, 23 July 2007 (UTC)[reply]
2,000 dpi resolution for positive halftones (Screened Prints made on an photographic enlarger)
A very special note: The resolution of a screen print or "positive halftone" (unlike the resolution of a negative halftone) is over 2,000 dpi. Computer programmers do not know this.
While the dots on a screen print are spaced 85 to the inch, the resolution of the center of the dot (where the half tone screen for a screened print is almost completely transparent) is the resolution of the very high contrast photographic paper (not the line resolution of the screen used to make the screened print.)
  • For big, fat dots, the resolution is only 85 dpi since the dots are big and round (the same as the halftone screen.)
  • In the center of dots (which is the highlights on a screen print and contains the most important details of the image), there is a posterized image at the center every dot smaller than about 25%. This posterized image includes a very accurate image of that portion of the dot. The resolution of that posterized image was limited only the the limits of the photographic emulsion on the halftone paper which is at least 2,000 dpi. If there was an image with a sharp line, that line will clearly be seen in the center of the dots at full 2,000 dpi resolution.
This effect is not important with negative halftones since the tiny dots of a negative halftone are the shadow areas so you only see detail in black areas where there is little detail, not sharp lines or detailed images that you see in the center of a screened print dot (the highlight.)
When computer software companies began creating software for halftoning on a computer, they programmers did not know about the screen print effect. They just assumed that a screen print was simply the reverse of a negative halftone. Not so! Programmers did not know that a postive halftone can be made which combines a half tone with a posterized image of the highlights to give an huge increase in halftone quality (2,000 dpi).
Therefore, even today, all computer software for creating positive halftone dots is wrong. Hopefully, someone will read this and correct their software to allow 2,000 dpi digital positive halftones just like the screen prints made long ago on photgraphic enlargers. Robert Elliott 16:49, 23 July 2007 (UTC)[reply]

I find it interesting that people see any connection between half-toning and digital scanning. There is none, other than that both systems sample the original image. Half-toning is wholly analog. WilliamSommerwerck (talk) 12:39, 9 January 2011 (UTC)[reply]

talk page purpose

[edit]

While I very much enjoy and benefit from the technical discussion, below, in my confusion I'd thought that this talk page's purpose was for writers to discuss the merits of the current wiki page. This writer, for example, longs for a definition or three of "halftone," a definition that will precede the descriptions of "halftoning" that dominate the wiki page. Walter Dufresne 20:21, 3 January 2007 (UTC) walterdufresne Brooklyn, New York, 3 January 2007[reply]

Talk pages can also be used for relevant general questions about the subject. Such questions often help improve articles as much as pointed critiques, as they show the gaps in the article's current explanations. --jacobolus (t) 10:58, 9 May 2007 (UTC)[reply]

seeking a working definition of "halftone"

[edit]

The page does a wonderful job of defining, at length and in detail, such compelling processes as "halftoning." This seems good. I miss reading any kind of definition of a slightly different thing, the "halftone" of the page's title.

What is a halftone? How might we define such a thing? Is it possible to write a working definition of "halftone"?

Walter Dufresne 17:21, 6 February 2007 (UTC)Walter Dufresne, Brooklyn, NY, USA[reply]

Yes - something is missed in this article. An actual definition of "halftone", the names derivation, the invention and history of the process. This article seems to be written backwards from the modern process and doesn't seem to dig very deep. Needs a little work. Fountains of Bryn Mawr 04:37, 3 May 2007 (UTC)[reply]

Missing title in references

[edit]

I have just completed a missing title in the references, but I'm not sure it is correct:

Twyman, Michael. Printing 1770-1970: an illustrated history of its development and uses in England. Eyre & Spottiswoode, London 1970.

I noticed the title was missing. Library of Congress has only two titles by this author in the year of 1970; this one and Lithography, 1800-1850: the techniques of drawing on stone in England and France and their application in works of topography.

I made an educated guess (that section deals with printing, not litography), but I'm not sure this is correct. Could someone confirm? —Preceding unsigned comment added by Miguel Vieira (talkcontribs) 21:33, 9 December 2007 (UTC)[reply]

image described as the first halftone

[edit]

In Penrose Annual 1928 page 93, Stephen Horgan describes the "Shanty Town" as the first highlight halftone published in the Daily Graphic. Can some one confirm that Steinway Hall in Manhattan image is in fact a halftone and not perhaps some other process such as photogravure.


JHM —Preceding unsigned comment added by Johnhenrymartin (talkcontribs) 10:18, 22 March 2010 (UTC)[reply]

Reference issue with 1st printed halftone photo

[edit]

Concerning the claim that the Steinway Hall in Manhattan was the 1st halftone photo published in a paper in 1873's NY Daily Graphic, is this from a reliable source. Every source I have ran into, other than LIFE's "100 Photographs That Changed the World", has said the first printing was the 1880 printing in the NY Daily Graphic of a "Shanty Town". Is there a way to get a better scan of that page to show the publishing date? Could it be that LIFE has propagated this entire claim, since every other source says the 1880 as the date, and the 7 year gap between the two seems suspicious? —Preceding unsigned comment added by 99.68.221.173 (talk) 00:29, 15 November 2010 (UTC)[reply]

Agree. Relying on the 2003 text LIFE's "100 Photographs That Changed the World" is risky. Until a 'first' halftone is verified in more than one reliable authoritative source, the current illustration captioned "The first printed photo using a halftone in an American periodical, December 2, 1873" is misleading (is it actually a letterpress image?) and thus should be kept out of the article, and so what if it is the first 'American' halftone when Germany or Canada were first? The LIFE publications are a rehash of older magazine articles and are journalistic, US-centric, and not scholarly.
After exhaustive searching I too can find no claim for a first letterpress halftone in the major texts on photo process and industrial printing other than for the Stephen Horgan's single-line halftone image, 'Shantytown', (cited in Meggs, but—be aware—it's a claim made by Horgon in his own Horgan, Stephen H (1913). Horgan's half-tone and photomechanical processes. Inland Printer Co, Chicago) which appeared in the New York Daily Graphic in 1880—it's reproduced in numbers of publications so why not replace the existing 'Steinway Hall' pic with that? It must be out of copyright. As to 'Steinway Hall' preceding it, Terresa McIntosh, 'W. A. Leggo and G. E. Desbarats: Canadian Pioneers in Photomechanical Reproduction'. In History of Photography, vol. 20, no. 2 (Summer 1996), p. 146 pushes for acceptance of the Leggo process as the first halftone in a newspaper, the Canadian Illustrated News, October 1869, though it was an intaglio print...see: Notman, creator of the first halftone at Google Arts & Culture Jamesmcardle(talk) 03:37, 9 July 2019 (UTC)[reply]

Do these items need rethinking and rewriting?

[edit]

"Where continuous tone imagery contains an infinite range of colors or greys, the halftone process reduces visual reproductions to a binary image that is printed with only one color of ink. This binary reproduction relies on a basic optical illusion—that these tiny halftone dots are blended into smooth tones by the human eye. At a microscopic level, developed black and white photographic film also consists of only two colors, and not an infinite range of continuous tones. For details, see film grain."

I find this confusing and even self-contradictory. If one wants to get picky about it, even a "continuous-tone" image made from pigment or dye (eg, a Rembrandt) comprises discrete molecules of the coloring agent, and cannot be truly said to be "continuous". It simply looks continuous to the eye. If film grain is invisible to the eye, then the image is, for all practical purposes, "continuous".

And as for "one color of ink"... A fine-grain color photographic print appears "continuous", but is printed with only three ink colors, each a primary.

"Just as color photography evolved with the addition of filters and film layers, color printing is made possible by repeating the halftone process for each subtractive color — most commonly using what is called the "CMYK color model". [2] The semi-opaque property of ink allows halftone dots of different colors to create another optical effect — full-color imagery.[1]"

Why does the writer use "semi-opaque"? I think he meant "The near-transparency of ink in thin layers allows the printing primaries to produce a wide range of colors." It also should be pointed out that color half-toning is generally design to minimize primary overlap, thus rendering the issue of transparency or opaqueness moot.

Regardless, these paragraphs need work. The writer has not properly thought through what he's trying to say. WilliamSommerwerck (talk) 12:54, 9 January 2011 (UTC)[reply]

I agree. Work on it, please. And cite sources if you can. Let us know here if you need help. Dicklyon (talk) 18:08, 9 January 2011 (UTC)[reply]
Yep, sounds somewhere between misleading and wrong. Feel free to rewrite those paragraphs altogether if you can. –jacobolus (t) 21:00, 9 January 2011 (UTC)[reply]

poor picture

[edit]

the example picture would not appear the same as the gradient beside it, this might be confusing 76.102.137.73 (talk) 07:57, 13 April 2014 (UTC)[reply]

whether or not the gradient beside the large dots example will appear like it depends quite a bit onthe "gamma" adjustment of the viewer's monitor.--23.119.205.88 (talk) 20:30, 6 June 2014 (UTC)[reply]


Half tone process not explained

[edit]

The article explains what a halftone is but never explains how it is made except to vaguely cite that a screen is used. An explanation of how the screen, which we can presume has holes of all equal size, creates dots of unequal size woudl be useful in this article.--23.119.205.88 (talk) 20:30, 6 June 2014 (UTC)[reply]

File:Halftoningcolor.svg to appear as POTD soon

[edit]

Hello! This is a note to let the editors of this article know that File:Halftoningcolor.svg will be appearing as picture of the day on July 12, 2016. You can view and edit the POTD blurb at Template:POTD/2016-07-12. If this article needs any attention or maintenance, it would be preferable if that could be done before its appearance on the Main Page. — Chris Woodrich (talk) 01:52, 27 June 2016 (UTC)[reply]

Halftone
Halftone is the reprographic technique that simulates continuous tone imagery through the use of dots, varying either in size or in spacing, thus generating a gradient-like effect. Shown here are three examples of color halftoning with CMYK separations. From left to right: The cyan separation, the magenta separation, the yellow separation, the black separation, the combined halftone pattern, and finally how the human eye would observe the combined halftone pattern from a sufficient distance.Illustration: Pbroks13; SVG: Slippens
[edit]

Hello fellow Wikipedians,

I have just modified 2 external links on Halftone. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, please set the checked parameter below to true or failed to let others know (documentation at {{Sourcecheck}}).

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—cyberbot IITalk to my owner:Online 11:21, 12 July 2016 (UTC)[reply]

Clarification on differing definitions

[edit]

In the section Multiple screens and color halftoning, the measure of Screen Angle is defined as being "measured in degrees clockwise from a line running to the left (9 o'clock is zero degrees)", yet farther down (near the See also section) the picture shows angles measured counter-clockwise with 3 o'clock being zero. Which is correct??

Thanks! WesT (talk) 22:10, 29 May 2018 (UTC)[reply]

Suggesting 'Halftone' moves to 'Photomechanical reproduction'

[edit]

May I propose that this article, given its content, would be more correctly titled 'Photomechanical reproduction' with a redirect from Halftone? 'Halftone' is too narrow, and really most of the article deals with the problem of the translation of photographs, whether emulsion or digital, to ink...i.e. photomechanical reproduction as it is broadly known. Such a change will give the article better scope and allay the frustration of finding that searching the common term photomechanical reproduction on Wikipedia currently leads down a weird but intriguing rabbit hole to Photomechanical effect. I'll of course hold off for a suitable duration for others' opinions before making such a move, but I feel strongly that it should be done. Thank you for considering this suggestion. Jamesmcardle(talk) 01:50, 9 July 2019 (UTC)[reply]

Let's start by making Photomechanical reproduction a redirect to Halftone. When I do, your red links will turn blue. Not sure how you got to Photomechanical effect; autocomplete in the search box? Dicklyon (talk) 02:27, 9 July 2019 (UTC)[reply]
Thank you @Dicklyon:, that would be good to start with and save some frustrated searching. Yes finding Photomechanical effect was probably due to autocomplete in the search box. Jamesmcardle(talk) 02:32, 9 July 2019 (UTC)[reply]
Take a look at WP:AT, and if you still think that moving to the other title could be a win, use the process at WP:RM to propose it and make your case here. I doubt that I could support it. Dicklyon (talk) 02:39, 9 July 2019 (UTC)[reply]
Yes, 'Halftone' is a more common, 'everyday' term but it is a specific technology within 'photomechanical reproduction'. Maybe you'd support a 'photomechanical reproduction' article that is more encompassing of the big subject, with a link to the 'halftone' specifics? Jamesmcardle(talk) 03:43, 9 July 2019 (UTC)[reply]
You could write a section such as ==Other photomechanical reproduction technologies== and then we can discuss how we like it and whether it merits a split or re-org/move. Dicklyon (talk) 03:51, 9 July 2019 (UTC)[reply]
An eminently sensible suggestion. Shall do. Jamesmcardle(talk) 06:30, 9 July 2019 (UTC)[reply]