Jump to content

Talk:SuperDisk

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

I just noticed that there's another, totally different LS-120 page describing the same thing. Perhaps the info here should be merged with that page? -lee 06:08, 31 Dec 2003 (UTC)


Old LS-120 article. Some info I couldn't really verify (and some that's wrong), so I put it here until things can be sorted out better... —Mulad 19:56, 3 Jan 2004 (UTC)

LS-120 is an advanced replacement for the floppy disk drive. Using the same media as existing 1.44MB floppies, LS-120 adds an accurate alignment system and advanced encoding to increase the capacity of a single diskette to 120MB. Many have touted it as the logical replacement for the hard drive, but it appears that the increasing capacity of solid-state devices such as USB keydrives have largely rendered LS-120 unmarketable.

The normal floppy disk has to deal with a number of mechanical problems that mean it is forced to store considerably less information than is theoretically possible. The main problems encountered are mechanical, the diskette surface cannot be accurately placed under the read/write heads, and therefore the "tracks", concentric rings of information, have to be much wider than needed.

Using a head-placement mechanism guided by a laser servo driving a much smaller head, LS-120 increases the number of tracks from to 2490 tracks per inch. The head also has the ability to read ordinary 3.5" floppy disk.

Normal floppy-disk controllers are not capable of addressing this number of tracks, and the LS-120 therefore uses the 40-pin IDE connection which is also used by hard-disk and CD-ROM.

The LS-120 standard was initially developed by Imation Corporation, Compaq Computer Corporation, Matsushita-Kotobuki Industires Ltd (also refereed to as Panasonic)and OR Technology. It has appeared as an add-on product for some time, but is rarely seen built-in to new machines. It has never reached crticial mass, largely for this reason, and is caught in an odd market space where computer manufacturers are unwilling to use it because no-one else does.

I believe that I am correct in remembering that the word "laser" (also?) refers to the fact that LS-120 disks were formatted at the factory with a laser so as to make maximum use of the available space on the disk. The LS-120 disk could be wiped but not formatted by the user in his/her drive. The user could, however, format standard floppy disks with the drive using the Windows formatting tool. NorthCoastReader (talk) 01:44, 14 July 2012 (UTC)[reply]

Automatic ejection?

[edit]

I've heard rumors that LS-120 drives are able, like Macintosh floppy drives, to eject the diskettes themselves, rather than having to press a button. Can anyone verify this? I myself am interested for the casemodding opportunities (namely, "stealthed" or Mac-style drives). Vintagejonny 05:03, 12 January 2007 (UTC)[reply]

That's how it works on our LS-120 connected to our Macintosh.
Atlant 14:07, 12 January 2007 (UTC)[reply]
The drives have had a software eject since the beginning. —The preceding unsigned comment was added by 38.112.225.178 (talkcontribs).
Correct, it is a pure 'software' eject. The button is not a physical eject button like on standard 3.5" drives, and ejection can be locked by the OS. (As it is on a Macintosh by default, requiring an OS-based eject command.) On Windows, you can software eject by right-clicking on the drive in "My Computer", and selecting "Eject" from the drop-down menu. (On some setups of Windows XP and Vista, you may see an 'Eject' button in the 'Tasks' list on the left of the window, or in the toolbar on the top of the window. This works as well.) And the more commonly used term is "software eject", not "automatic eject" 71.193.207.217 03:34, 18 October 2007 (UTC) (User:ehurtley, just not logged in on this computer.)[reply]

Confirm Removal of line:

[edit]

This line sounds quite outdated...

Today, the format faces heavy competition from recordable CDs and DVDs, as well as solid state USB keydrives.

...compared to this:

Matsushita continued development of the technology and released the LS-240, which was still fairly available in Asia and Australia until 2003 but is now quite rare. It has double the capacity and the added feature of being able to format regular floppy disks to 32 MB capacity. However, this higher density comes at a price—the entire disk must be rewritten any time a change is made, much like early CD-RW media.

--Debug-GED 08:02, 18 September 2007 (UTC)

The true capacity of these "100 MB" drives is 120.375 MB -what-??

[edit]

The article has a sentence that reads "The true capacity of these "100 MB" drives is 120.375 MB". Isn't that wrong? I read it as the capacity is one-hundred-and-twenty thousand three hundred and seventy Megabyte. In my opinion it should either read 120,375 MB (with a comma) OR 120.375 KB, or am I missing something here? Mahjongg (talk) 00:51, 5 September 2008 (UTC)[reply]

P.S. what might be confusing is that in the country I live in the dot, not the comma is the separator in big numbers (so a hundred thousand is written as 100.000). I Know that might not be the case in the US and a comma should be used instead, but I have never seen a long number with a dot as the divisor separating the whole numbers (on the left of the dot) from the broken numbers (to the right of the dot). So my actual question is, does "120.375" in this case mean "one-hundred-and-twenty, plus three-hundred-and-seventy-five thousands of a part" (120 + .375) in this context? If that is true then that sounds truly strange to me. Mahjongg (talk) 01:08, 5 September 2008 (UTC)[reply]
The article seems to have been written in "U.S. English" in which the comma is used to group digits in large numbers, and, in the example you give above, "one hundred thousand" would be written 100,000. In the case of the storage capacity of the LS-120 drive, however, the number shown (while representing a truly large number of bytes of storage capacity for the form factor) uses a different expression convention - it is expressed in terms of megabytes instead of kilobytes or bytes. Because of that, the number to which you refer, "120.375 MB," has a "dot" or decimal point which separates the whole number of megabytes to the left of the decimal and a fractional portion of a megabyte to the right of the decimal. So a literal translation of the number would be: "one hundred twenty megabytes plus three hundred seventy-five thousandths of a megabyte."
Three ways of expressing the same number would be:
  • 120.375 MB - A large number expressed compactly.
  • 120,375 KB - A large number expressed more expansively.
  • 120,375,000 B - A large number expressed much more expansively.
NorthCoastReader (talk) 01:33, 14 July 2012 (UTC)[reply]

Death / memories of LS-120

[edit]

My LS-120 from the 1999 is still in mint condition boxed. I was short lived and we'll surely miss such a great piece of small technology. R.I.P. LS-120. —Preceding unsigned comment added by Andwan0 (talkcontribs) 15:55, 4 December 2009 (UTC)[reply]

OR moved from "Floppy disk variants" article to talk

[edit]

I removed the following unsourced contents from the floppy disk variants article, but will put it here for further review. It was originally added to that article by IP 87.244.118.13 in 2012-04-06 [1]: --Matthiaspaul (talk) 16:22, 19 June 2017 (UTC)[reply]

One suggested improvement[according to whom?] to LS-240 was the addition of an optical reader based on low-resolution B/W CCD technology, as this would've been able to detect disk flaws before they could cause data loss and adjust write strategies accordingly.[according to whom?][original research?] Also it would've allowed detection of damage caused by head misalignment before the data surface was compromised.[according to whom?][original research?] Had this ever been implemented then it would have allowed the LS-240 to store nearly 500 MB of data.[according to whom?][original research?] This strategy was later implemented on HP and Epson printers to allow photo quality printing on normal non-photo paper.[citation needed]
Well done, sounds highly speculative and likely OR. --Zac67 (talk) 17:06, 19 June 2017 (UTC)[reply]

LS-240 examples?

[edit]

There are mentions, but few specifics on the ls240. Would someone link to articles demonstrating who made those models? Dcsutherland (talk) 02:56, 26 February 2020 (UTC)[reply]