Jump to content

Talk:Combine harvester

Page contents not supported in other languages.
From Wikipedia, the free encyclopedia

A Lot More Work on Progression of Technology

[edit]

First, we have the sickle bar mower, a sharp-toothed device moving back and forth between fixed point, thus allowing a shearing of the crop. (Note that ripe, dry crop stalks are far easier to cut than "green" ones) such devices are still in common usage--occasionally in roadside trimming, though much of this is done by a rotary mower which is little more than a very large version of a common 20" home lawn mower. Next, we have the Cyrus McCormick reaper which collected an amount of cut crop on a platform and dropped it in a pile This progressed rapidly to the binder which collected several hundred stalks of crop, and with the help of a mechanical knotter (we need to give credit to this inventor), tied them into a bundle. Improvements quickly allowed the collection of a number of bundles into a "shock." The Wichita State University sports teams logo is the Shockers....yes, it looks like a huge bundle of wheat (Kansas is the wheat state) with the grain heads drooping from the top. The next step is the development of a threshing machine, which, though mobile to move from site to site, is stationary in use, with a steam or gas/diesel/oil burning tractor to provide power via a large, flat drive belt, often over 100 feet in length. Workers threw bundles of ripe grain stalks into the feeding intake mechanism with pitch forks, from hopper trailers of wheat shocks which had been collected from the fields. A threshing crew could easily be a dozen or more men--at least four to six to collect the wheat in the field--two more to run the tractor and fetch water and coal if it was a steam tractor--a chief machine operator--a couple of guys to collect and haul the grain away...and certainly a couple more to tend to the horses. In the plains states of the US, the transition to self-propelled harvester combines coincided with the end of World War II. Early combines often had separate industrial engines and horsedrawn combines before the war obtained rotary power from the forward motion of a large wheel. Even a ground friction driven machine of small width would need at least six horses. I'll let someone else take it regarding the inside mechanicals of a harvester, which involves beating the incoming stalks, with blowers to remove the hulls "which the wind driveth away." (just like in Biblical times--Psalm 1:4) Moving and reciprocating table like devices "walk" the straw to the outlet of the machine, while the seeds fall down in a hopper, as their weight keeps them from going out with the straw. (Modern combines have electronic "eyes" that see seeds going over and not being collected properly, so the farmer/operator can make appropriate adjusments. So, can someone else help me with drawings and photographs? Homebuilding207.178.98.32 (talk) 01:38, 26 February 2008 (UTC)[reply]

John Appleby of Beloit, Wisconsin invented the knotter used on binders.
As an aside, a picture near the bottom of the article shows an old self propelled McCormick combine. Note the chimney-like structure that goes up from the engine's radiator. That's a screen on top. It's up way high to try and keep it out of the chaff that the combine produces. Chaff was a BIG problem as it clogged the radiators and lead to the engine overheating, ruining the engine. Nowdays you'll find the self-cleaning rotary screens in front of the radiators. Solved the problem nicely. As simple as it is, its extremely important.--71.38.174.228 (talk) 23:58, 14 November 2009 (UTC)[reply]

Old talk

[edit]

This page has more detail which we could mine. [1] Rmhermen 14:42 28 Jul 2003 (UTC)


Well, there's some. Kat 19:25 28 Jul 2003 (UTC)

I know that the leveling concept was invented by a man named "haywire" Hansen but can't find the company or reference too it online. I lived near his house however. If anyone can find info it's an intersting fact. His company was bought out long ago I believe. Jenshegg 23:45, 17 Feb 2005 (UTC)


The thing I noticed is that about half the article is dedicated to sidehill combining but no mention of what happens to the crop after it is cut and conveyed into the throat is made. If I had time, the other things I would add would be (1) mention of price (these are extremely expensive machines) and how it forces many (at least American) farmers to hire out "custom combine" services and (2) a picture of a modern combine with a wide wheat header to demonstrate how wide a swath the machine can cut in one pass. Ari 19:04, 27 Feb 2005 (UTC)


(on 1)Swedish and danish versions mention a "high cost per hour" due to the short period of use and the high price.
(on 2) I saw an article mentioning that John Deere were the largest in march this year, thou this was in Denmark with small fields, and "just above 30 ft" doesn't seem that large to me...
This site list a 40 foot width as the largest in the world apparently. Another site talks about a effective 20 foot width as being common after allowing for overlap using more common equipment. Rmhermen 18:16, 16 October 2005 (UTC)[reply]


Unfortunately no pics in the article, so no link G®iffen 16:33, 16 October 2005 (UTC)[reply]

Date of invention?

[edit]

https://mobile.abc.net.au/news/2018-09-18/headlie-taylor-father-of-the-modern-header-harvester-statue/10256308?pfmredir=sm — Preceding unsigned comment added by 49.178.11.131 (talk) 14:27, 18 July 2019 (UTC)[reply]


Alvin Toffler in his book Futureshock states that the combine ('a machine that mowed, treshed, tied straw into sheaves and poured grain into sacks') was invented in 1836. Any more references to that? --Piotr Konieczny aka Prokonsul Piotrus Talk 14:49, 25 Apr 2005 (UTC)

The above Toffler reference is an incorrect hodge-podge. Various mechanical reapers were built by the 1830s, but they simply cut the grain heads and straw at ground level, leaving them on a platform to be human ties, and then left in the field to dry. The tied bundles were stacked together into shocks. The shocks were collected on wagons and hauled to the site of a stationary threshing machine which were invented in the later 1830s. Horse-drawn combines were made before the widespread use of steam power. (A large wheel on the combine, when drawn forward would operate all mechanical components. It might be fair to say that the labor requirements for harvesting grain were reduced dramatically from 1830 to 1850 and there were many gradual changes in the next 100 years. By 1950, self-propelled combines were in near universal use in all economically advanced countries. — Preceding unsigned comment added by 68.97.76.105 (talk) 20:15, 30 November 2015‎ (UTC)[reply]

That almost certainly would be false, as the reaper was only invented in 1831. The binder, which could tie sheaves, was only invented in the mid 1870s. It would take a large team of horses to supply the power needed to run even a primative combine. Also, in the mid 1830's I don't believe that a steam engines were sufficiently advanced either. --71.32.166.217 04:48, 11 August 2005 (UTC)[reply]

Incomplete research by Mr. Toffler, obviously.Landroo 05:00, 30 July 2006 (UTC)[reply]

Talking about the date, how did HV McKay get missed? The sunshine harvester was the first to be commercialised i think, and that was in 1885. Also i can only find 1 article on Hiran Moore, and all it says is he invented the combine. Poor evidence if you ask me. Shemefle 17:13, 31 October 2009 (AWST)

Just thought that I should add that there is no direct reference to why a "Combine-Harvester" is called a "Combine-Harvester". Of course the machine combines the previous separate processes but in which case one would have thought that it would have been called a "Combined-Harvester" and not a Combine. It would be interesting to know when the terminology came into common use. gilfrid 13:00, 13 September 2009 (GMT)

It combined reaping, and threshing (and eliminated the need for binding). --71.38.174.228 (talk) 02:04, 15 November 2009 (UTC)[reply]

First Self Propelled

[edit]

I've got a reference which indicates that the first self propelled combine was a Gleaner, developed starting 1923. The article is from AGCO (Gleaner) and seems to be a bit coy about what it's saying so I'm reluctant to modify the main article. http://www.masseyferguson.com.au/agco/Gleaner/GleanerEAPAC/AboutGleaner/Heritage.htm

The main article states it was invented by Class in 1953. Does anyone out there know of a reference that would show a self-propelled Gleaner combine before 1953? This would invalidate the Class claim.--71.38.174.228 (talk) 02:04, 15 November 2009 (UTC)[reply]

The Baldwin Brothers of Nickerson, Kansas invented a variety of mechanical farm improvements and in the early 1920s had a "bolt-on" combine that fitted around a Fordson Model F tractor. They built this for several years, until Fordson stopped production of this tractor. There is a photo of this arrangement at Gleaner in wikipedia. I believe this photo was taken in a mini-museum on the grounds of the AGCO plant in Hesston, Kansas. At this plant, modern Gleaner, Challenger, and Massey-Ferguson combines are made, presently, by the AGCO corporation.— Preceding unsigned comment added by 68.97.76.105 (talk) 20:30, 30 November 2015‎ (UTC)[reply]

what about Massey Harris (Model #20-21) combines approx 1938-39 —Preceding unsigned comment added by 64.201.218.72 (talk) 01:26, 5 April 2010 (UTC)[reply]

The first self propelled combine (of which at least I can give sufficient verifiable information) was manufactured in 1929 in Sunchales, Sta. Fe, Argentina. It is housed in a glass made shed in the same city and in the year 2000 it was refurbished together by the company CLAAS and NIDERA. Sorry, all the links in Spanish.. (by Reinsalkas) http://www.clarin.com/suplementos/rural/2000/01/29/c-00401r.htm http://www.cavaargentina.com/es/noticias-nacionales/argentina-ya-produce-su-primera-cosechadora-mecanica-de-uvas.html http://www.lanacion.com.ar/nota.asp?nota_id=651079 http://www.facebook.com/note.php?note_id=416426403377 —Preceding unsigned comment added by 200.2.127.242 (talk) 17:20, 6 May 2010 (UTC)[reply]

I did some search and this is what I found.

Sunshine Auto Header (Australia, ~1924): Here are some sentences from the book "Remarkable Australian Farm Machines: Ingenuity on the Land" by Graeme R. Quick: "They took out patents in 1923 and named it the Sunshine Auto Header...The first production Sunshine Auto Headers were released in 1924. They had a 12 foot (3.66 m) cut and were powered by a Fordson 25 HP engine...The Auto Header was produced at the Sunshine Works from 1924 through 1947, by which time a total of 1356 units had been made. In 1932, Massey-Harris had bought into Sunshine ..."
There are also many pictures in this book, old and also new ones, showing that there are still a few of them around in working condition.

Gleaner (USA, ~1923): I found some information in the company brochure "Gleaner 85th Anniversary" (http://www.agcoiron.com/fileUpload/GLEANER_85Years_Brochure.pdf):
Fordson-mounted, Patent No. 1,702,323 for the company in 1923, sales of around 100 combines, but then, it seems, the company switched to pull-type models, partly due to the "demise of the Fordson". I don't know what that means, maybe it refers to the fact that the production of Fordson tractors in the US ceased in 1928. Gleaner began making SP combines again only in the early 1950's.

Rotonia (Argentina, 1929): Sorry, I do not have any information in addition to what has been said above.

It seems that the first that was really successful in the US, was the Massey-Harris model 21 in the early 1940's, followed by the International Harvester 123-SP (introduced in 1942) and the John Deere 55 (1947). (http://www.livinghistoryfarm.org/farminginthe40s/machines_05.html).

So this statement about Claas being first in 1953 is obviously not true, even if it is written in an article of the London Times.

Maybe some writer can use this information to improve the article.
188.22.162.92 (talk) 21:08, 13 May 2010 (UTC)[reply]

Correct Category?

[edit]

I see the line [[Category:Engineering vehicles]] in the bottom and can't figure out what a combine does in engineering? G®iffen 16:33, 16 October 2005 (UTC)[reply]

RE: Old Talk

[edit]

"Sidehill" machines were produced to deal with harvesting conditions found in the Northwestern US and in Canada. (I'm sure many other parts of the world use these features also, however, I will speak from an American's point of view).

Problems with conventional cylinder\walker machines when operated on hillsides are many. First, the cylinder and really, the entire seperator likes to deal with a consistant amount of material through-out it's entire width. When operating on a hillside, the material will tend to fall to the low side of the machine. This causes issues with slugging the cylinder. (Slugging a cylinder is a slang term where the operator has allowed the cylinder to become overloaded with material, or fed it green material. The distance between the rasp bars and the concave bars is typically 1/4" or less. The cylinder can not deal with the influx of green or too much material and it stops turning abruptly.) The cylinder can not process the material properly in a hillside condition, so this will leave grain in the head that will continue through the machine and be 'thrown-over' the straw walkers. The grain that is processed along with the straw and chaff material will continue to the shoe and overload the downhill side of the seives. The fan can not lift the bunched up straw and chaff properly. This causes throw over as the clean grain goes out the back with this overload of material.

The Sidehill feature is simply a method by which we allow the front axle to pivot independatly from the rest of the machine. Hydraulic cylinders are connected to both ends of the axle and can be adjusted to level the seperator up to about 15 degrees of axle pivot.(KF)


On Cost: In 1980, a brand new, mid-range "John Deere 7720 Titan" could be purchased from the dealership for $80,000 USD. That included the base model, and most features available at the time, such as a Hydrostatic drive, Secondary countershaft sensors, the "Sound-Gard" cab with air-conditioning and an AM/FM/Casette radio. The standard cross-auger 24' Model 224 grain platform header was an extra $15,000. The Deere 643 6-row corn head was around $20,000, and the Deere 653 Row Crop head was also close to $15,000. All 3 were needed if you planned on harvesting your own small grains like wheat or barley, and corn and milo or sunflowers. Total was nearly $130,000 USD.

In 1985, the same setup was $200,000 USD if all the headers were purchased new along with the new 7720 Titan II machine that by itself had gone to $120,000.

Today, a new Top line Deere 9660 WTS (conventional cylinder/walker machine) will cost you $250,000 by itself.

On the subject of headers. In 1920, Holt Caterpiller built a self-propelled machine that had a side mounted 50' wide canvas draper header. This is the largest header ever installed on any combine to-date in the US. Today, common widths are 18,20,24 and 30'. The largest headers are built by Macdon and Shelborn. The Macdon draper headers top out at 39' while the shelborne stripper headers top out at 32'. Deere provides a draper header to 36'.

Rotary vs. Conventional Design

[edit]

When rotaries were first introduced, larger engines were considered the tradeoff for a better technology. It wasn't long before someone put two and two together, and realized that the same power applied to a conventional machine would produce similar performance. It seemed to make more sense to revert back to conventional machines with better straw-handling capabilities after that.

Perhaps that's why some manufacturers chose to stick to conventional designs, increasing their capacities, while the rotary combine fad was going on. Landroo 19:01, 25 June 2006 (UTC)[reply]

Rotary History

[edit]

Sperry-New Holland introduced rotary combines in 1975. The IH axial flow in 1977 was a copycat. Sperry-New Holland was the innovator of this technology. I've added a reference, but I've seen other references claim the IH was first. Having been around for awhile, and with a farming background I know personally that Sperry New-Holland was first. --71.38.174.228 (talk) 00:33, 15 November 2009 (UTC)[reply]

I believe the Roto Thresh was actually the first. http://www.wdm.ca/skteacherguide/WDMResearch/HarvestingDvpt.pdf —Preceding unsigned comment added by 207.195.73.212 (talk) 03:44, 19 July 2010 (UTC)[reply]

Depending on how you define a rotary combine, the Roto Thresh was a significant predecessor to most of the rotary designs which appeared in the late 1970s. Although each design had significant differences, they all essentially used the threshing cylinder for most of the separation. The Roto Thresh also used a separate centrifugal separator, apart from the cylinder for separating the chaff from the straw.Landroo (talk) 14:10, 23 September 2010 (UTC)[reply]

FYI - Image found on commons

[edit]

[[Image:Jd9880sts.jpg|thumb|right|] - Leonard G. 00:45, 22 December 2006 (UTC)[reply]

Quick-tach

[edit]

An anon editor added 'quick-tach' to the Headers section:

Combines are equipped with quick-tach removable heads

Some very quick web research suggests that it was originally a Bobcat proprietary system, and therefore should be capitalised (see here).

However, I would suggest that this is a modern development, and should be noted lower down the page.

EdJogg 13:14, 26 February 2007 (UTC)[reply]

[edit]

FIRST I think the Combine from the movie twister should be removed, because it just picks the thing up and drops it, it's like if a semi truck is lifted up in a tornado, you wouldn't have the movie Twister referenced in the article. SECOND consider adding Half-Life 2 because the empire that enslaves mankind is called the combine THIRD In an Itchy And Scratchy episode one of them is rnu over by a combine and Krusty says something about them having fun until getting run over by the thresher


Reply the hl2 really has no real reference. it is a similarity in the name but not in the actual meaning, combine as in enslaving and combine as in harvesting have no relevance to eachother —Preceding unsigned comment added by 24.58.221.6 (talk) 04:05, 21 December 2007 (UTC)[reply]

Three Processes

[edit]

The beginning part of this article states that a combine performs 3 processes which were previously performed separately, but it doesn't state what these three processes are. This seems like a pretty critical fact and should be stated in the openning paragraph. Jlenthe (talk) 16:04, 2 August 2009 (UTC)[reply]

Hi, I am new to combine harvesters. I was wondering if it would be possible to add a cut away picture so as to show the inner workings of a combine? I can understand the operation as it is described, but a inside view would be helpful. Thanks though for a great article. —Preceding unsigned comment added by 122.108.195.145 (talk) 09:45, 23 September 2010 (UTC)[reply]

The name "combine "

[edit]

I didn't see it in the article. Why "combine"? — Preceding unsigned comment added by 74.196.153.73 (talk) 18:39, 27 June 2011 (UTC)[reply]

The name 'combine' refers to the combination of harvesting (collecting) and threshing functions. Prior to WWII, these functions were often separate. We need to go back all the way to the "binder" invented by Cyrus McCormick. These were horse-drawn machines that cut off the near mature stalks/grain heads of various crops, dropping them on a platform where an operator (and later the machine) would tie the crop into bundles. These bundles would be left in the field to dry/mature. As the harvest progressed, numerous bound bundles of grain would be collected into shocks. (These might be five to ten bundles.) When fully mature they would be loaded onto a trailer and hauled to a site where a threshing machine was set up with a steam or petroleum powered tractor. The tractor transferred the power to the machine via a belt which might be as much as ten inches wide with a total length approaching 100 feet. Considerable manual labor was involved in pitching the bundles into the machine, which would beat out the grain while blowing the chaff to a site, typically as far away from steam engine (coal fired) sparks, as possible.

Combining the binding/bundler functions with the threshing functions specifically saves a great deal of labor and requires the specialized combined ("combine") machine. A number of harvesting functions are altered, as well. Grain is now harvested (cut), now, only when the moisture percentage in the kernels is well below 15% (mature grains)--in binder times, the grain was bundled far earlier and wetter. The present procedure increases the risk of hail damage losses, though the spectacularly increased speed of the harvesting--now easily 25 times as fast as during WWII, mitigates this risk, substantially. — Preceding unsigned comment added by 72.198.101.30 (talk) 19:04, 19 January 2012 (UTC)[reply]

Effectiveness in a Zombie Apocolypse

[edit]

How effective would a combine be should the world be introduced to a zombie infestation? Would this vehicle be handy in mowing down a horde of zombies? Or is the perceived possibility of heavy and rapid damage infliction merely a device for Hollywood scenes? — Preceding unsigned comment added by 155.8.89.2 (talk) 08:38, 29 March 2012 (UTC)[reply]

I would refer you to Italy, to research a rotary flail device. Invented by Leonardo Da Vinci, it was drawn forward by horses, the rotating wheels transferred power to a circle of flails, perhaps two or three feet above the ground. This deadly machinery was just behind the horseman. I am certain that this information will be of value in planning for future fantasies. — Preceding unsigned comment added by 68.97.76.105 (talk) 20:39, 30 November 2015‎ (UTC)[reply]

Bakery

[edit]

In Germany, they now have added threshing, Mixing with water, kneading the dough and leaving it to rise, and baking to harvest breadrolls direct from wheat. I couldn't find any online sources, but have seen this process in operation in Bavaria. — Preceding unsigned comment added by 60.226.138.94 (talk) 19:34, 30 July 2012 (UTC)[reply]

Morrow vs McKay

[edit]

See http://www.radioaustralia.net.au/international/radio/onairhighlights/doubt-on-harvester-history

It's also unclear how stories like that refer to the Australians inventing the first combine harvester (not just the first commercial combine harvester) if an American invented it decades earlier.

David B 114.198.31.180 (talk) 14:24, 25 August 2012 (UTC)[reply]

Additional text not appearing in edit mode

[edit]

Where the hell is this additional "John is gay" text coming from? I can't find it anywhere in edit mode, let alone somewhere it can be removed. Here is an image showing the article in both display and source edit mode. I thought it might be my cache, but that doesn't appear to be the case. --Jasca Ducato (talk) 16:05, 13 December 2013 (UTC)[reply]

Well, I managed to fix it by reverting ClueBot NG's edit. Somehow :S --Jasca Ducato (talk) 16:07, 13 December 2013 (UTC)[reply]

Grain Auger

[edit]

This article says it was invented by Lyle Yost, yet the article Screw_conveyor#In_agriculture says it was Peter Pakosh. 2001:56A:F414:D300:7D01:6086:CA91:97DD (talk) 03:11, 8 June 2016 (UTC)[reply]

They both claim to have made them in 1947. It appears Yost developed the unloading auger specifically for combines. Pakosh appears to have invented the screw auger, a separate piece of equipment. [2][3] I can't find pictures of either original model - they may both be very similar and near simultaneous inventions. Rmhermen (talk) 20:21, 8 June 2016 (UTC)[reply]
[edit]

Hello fellow Wikipedians,

I have just modified 2 external links on Combine harvester. Please take a moment to review my edit. If you have any questions, or need the bot to ignore the links, or the page altogether, please visit this simple FaQ for additional information. I made the following changes:

When you have finished reviewing my changes, you may follow the instructions on the template below to fix any issues with the URLs.

This message was posted before February 2018. After February 2018, "External links modified" talk page sections are no longer generated or monitored by InternetArchiveBot. No special action is required regarding these talk page notices, other than regular verification using the archive tool instructions below. Editors have permission to delete these "External links modified" talk page sections if they want to de-clutter talk pages, but see the RfC before doing mass systematic removals. This message is updated dynamically through the template {{source check}} (last update: 5 June 2024).

  • If you have discovered URLs which were erroneously considered dead by the bot, you can report them with this tool.
  • If you found an error with any archives or the URLs themselves, you can fix them with this tool.

Cheers.—InternetArchiveBot (Report bug) 04:25, 11 August 2017 (UTC)[reply]