Jump to content

Generalized mean

From Wikipedia, the free encyclopedia
(Redirected from Power mean)
Plot of several generalized means .

In mathematics, generalized means (or power mean or Hölder mean from Otto Hölder)[1] are a family of functions for aggregating sets of numbers. These include as special cases the Pythagorean means (arithmetic, geometric, and harmonic means).

Definition

[edit]

If p is a non-zero real number, and are positive real numbers, then the generalized mean or power mean with exponent p of these positive real numbers is[2][3]

(See p-norm). For p = 0 we set it equal to the geometric mean (which is the limit of means with exponents approaching zero, as proved below):

Furthermore, for a sequence of positive weights wi we define the weighted power mean as[2] and when p = 0, it is equal to the weighted geometric mean:

The unweighted means correspond to setting all wi = 1/n.

Special cases

[edit]

A few particular values of p yield special cases with their own names:[4]

minimum
A visual depiction of some of the specified cases for n = 2 with a = x1 = M and b = x2 = M−∞:
  harmonic mean, H = M−1(a, b),
  geometric mean, G = M0(a, b)
  arithmetic mean, A = M1(a, b)
  quadratic mean, Q = M2(a, b)
harmonic mean
geometric mean
arithmetic mean
root mean square
or quadratic mean[5][6]
cubic mean
maximum
Proof of (geometric mean)

For the purpose of the proof, we will assume without loss of generality that and

We can rewrite the definition of using the exponential function as

In the limit p → 0, we can apply L'Hôpital's rule to the argument of the exponential function. We assume that but p ≠ 0, and that the sum of wi is equal to 1 (without loss in generality);[7] Differentiating the numerator and denominator with respect to p, we have

By the continuity of the exponential function, we can substitute back into the above relation to obtain as desired.[2]

Proof of and

Assume (possibly after relabeling and combining terms together) that . Then

The formula for follows from

Properties

[edit]

Let be a sequence of positive real numbers, then the following properties hold:[1]

  1. .
    Each generalized mean always lies between the smallest and largest of the x values.
  2. , where is a permutation operator.
    Each generalized mean is a symmetric function of its arguments; permuting the arguments of a generalized mean does not change its value.
  3. .
    Like most means, the generalized mean is a homogeneous function of its arguments x1, ..., xn. That is, if b is a positive real number, then the generalized mean with exponent p of the numbers is equal to b times the generalized mean of the numbers x1, ..., xn.
  4. .
    Like the quasi-arithmetic means, the computation of the mean can be split into computations of equal sized sub-blocks. This enables use of a divide and conquer algorithm to calculate the means, when desirable.

Generalized mean inequality

[edit]
Geometric proof without words that max (a,b) > root mean square (RMS) or quadratic mean (QM) > arithmetic mean (AM) > geometric mean (GM) > harmonic mean (HM) > min (a,b) of two distinct positive numbers a and b [note 1]

In general, if p < q, then and the two means are equal if and only if x1 = x2 = ... = xn.

The inequality is true for real values of p and q, as well as positive and negative infinity values.

It follows from the fact that, for all real p, which can be proved using Jensen's inequality.

In particular, for p in {−1, 0, 1}, the generalized mean inequality implies the Pythagorean means inequality as well as the inequality of arithmetic and geometric means.

Proof of the weighted inequality

[edit]

We will prove the weighted power mean inequality. For the purpose of the proof we will assume the following without loss of generality:

The proof for unweighted power means can be easily obtained by substituting wi = 1/n.

Equivalence of inequalities between means of opposite signs

[edit]

Suppose an average between power means with exponents p and q holds: applying this, then:

We raise both sides to the power of −1 (strictly decreasing function in positive reals):

We get the inequality for means with exponents p and q, and we can use the same reasoning backwards, thus proving the inequalities to be equivalent, which will be used in some of the later proofs.

Geometric mean

[edit]

For any q > 0 and non-negative weights summing to 1, the following inequality holds:

The proof follows from Jensen's inequality, making use of the fact the logarithm is concave:

By applying the exponential function to both sides and observing that as a strictly increasing function it preserves the sign of the inequality, we get

Taking q-th powers of the xi yields

Thus, we are done for the inequality with positive q; the case for negatives is identical but for the swapped signs in the last step:

Of course, taking each side to the power of a negative number -1/q swaps the direction of the inequality.

Inequality between any two power means

[edit]

We are to prove that for any p < q the following inequality holds: if p is negative, and q is positive, the inequality is equivalent to the one proved above:

The proof for positive p and q is as follows: Define the following function: f : R+R+ . f is a power function, so it does have a second derivative: which is strictly positive within the domain of f, since q > p, so we know f is convex.

Using this, and the Jensen's inequality we get: after raising both side to the power of 1/q (an increasing function, since 1/q is positive) we get the inequality which was to be proven:

Using the previously shown equivalence we can prove the inequality for negative p and q by replacing them with −q and −p, respectively.

Generalized f-mean

[edit]

The power mean could be generalized further to the generalized f-mean:

This covers the geometric mean without using a limit with f(x) = log(x). The power mean is obtained for f(x) = xp. Properties of these means are studied in de Carvalho (2016).[3]

Applications

[edit]

Signal processing

[edit]

A power mean serves a non-linear moving average which is shifted towards small signal values for small p and emphasizes big signal values for big p. Given an efficient implementation of a moving arithmetic mean called smooth one can implement a moving power mean according to the following Haskell code.

powerSmooth :: Floating a => ([a] -> [a]) -> a -> [a] -> [a]
powerSmooth smooth p = map (** recip p) . smooth . map (**p)

See also

[edit]

Notes

[edit]
  1. ^ If AC = a and BC = b. OC = AM of a and b, and radius r = QO = OG.
    Using Pythagoras' theorem, QC² = QO² + OC² ∴ QC = √QO² + OC² = QM.
    Using Pythagoras' theorem, OC² = OG² + GC² ∴ GC = √OC² − OG² = GM.
    Using similar triangles, HC/GC = GC/OC ∴ HC = GC²/OC = HM.

References

[edit]
  1. ^ a b Sýkora, Stanislav (2009). "Mathematical means and averages: basic properties". Stan's Library. III. Castano Primo, Italy: Stan's Library. doi:10.3247/SL3Math09.001.
  2. ^ a b c P. S. Bullen: Handbook of Means and Their Inequalities. Dordrecht, Netherlands: Kluwer, 2003, pp. 175-177
  3. ^ a b de Carvalho, Miguel (2016). "Mean, what do you Mean?". The American Statistician. 70 (3): 764‒776. doi:10.1080/00031305.2016.1148632. hdl:20.500.11820/fd7a8991-69a4-4fe5-876f-abcd2957a88c.
  4. ^ Weisstein, Eric W. "Power Mean". MathWorld. (retrieved 2019-08-17)
  5. ^ Thompson, Sylvanus P. (1965). Calculus Made Easy. Macmillan International Higher Education. p. 185. ISBN 9781349004874. Retrieved 5 July 2020.[permanent dead link]
  6. ^ Jones, Alan R. (2018). Probability, Statistics and Other Frightening Stuff. Routledge. p. 48. ISBN 9781351661386. Retrieved 5 July 2020.
  7. ^ Handbook of Means and Their Inequalities (Mathematics and Its Applications).

Further reading

[edit]
  • Bullen, P. S. (2003). "Chapter III - The Power Means". Handbook of Means and Their Inequalities. Dordrecht, Netherlands: Kluwer. pp. 175–265.
[edit]